What it does
The Skinner™ lets anyone produce a professional crimp on a door skin installation without creating dolly marks to the outside of the new skin. This saves time and money associated with plastic filler, cure time, grinding discs, and labor. It will work on a wide variety of thicknesses and creates a crimp that is tighter than that achieved with a hammer and dolly.
Start out using a 3/8" drive hand ratchet for greater feel and control. This setup is recommended for corners and detail work. Once experienced use an air ratchet to cover ground fast!
Start out using a 3/8" drive hand ratchet for greater feel and control. This setup is recommended for corners and detail work. Once experienced use an air ratchet to cover ground fast!
Watch it work
The video above shows a first time user running the Skinner™ by hand (note that the normal amount of panel bond he used was excessive due the tighter crimp) as well as gives an example of the speed it is capable with experience and an air ratchet.
